Steel stamps, Chasing & Repoussé tools & how to use them! Thursday evenings, April 12th thru 19th 6:30pm – 9:30pm
$175 per person, ALL materials included.
Make your own mark! Learn how to create stamping tools for decorative use, and chasing/repoussé tools traditionally used in making dimensional forms/decorations in copper, silver, gold for use in armour, architectural designs, and jewellery.
Students will spend the first evening designing and making their stamps and chasing/repoussé tools. The 2nd evening learning how to use these tools working with copper, a cast iron pitch pot and German pitch. Demonstrations in how to transfer pitch to their pots, transfer designs/images to metal, and through hammering/chasing these images will appear as low relief in the metal. Students will also have time to make a simple copper pendant using their decorative stamps made the 1st evening! Copper will be used in this workshop. Note: students receive a pitch bowl/pitch, copper for projects and a minimum of 12 stamping tools. Students leave the workshop with their copper practice pieces, stamps made from the first evening and the basic knowledge to continue forward. Hammers sold separately, but are available for use during class.
Further information can be found here.
Learn how to form, fabricate, solder, set-stones and more in our 4 wk Metal + Glass course.
4 week or 8 week course, choose your start-up time below.
Metal + Glass courses are offered evenings Monday & Wednesday.
Metal + Glass 8 week course. April 4th start. 6:30-9:30pm Wednesday evenings. Please see description below.
METAL + GLASS 4wk: Monday & Wednesday evenings – Learn basic Goldsmithing. 6:30-9:30pm Monday, April 9th $285pp
evening #1: First evening: working with copper: safety, drilling, sawing. Adding textures.
evening #2: Making a ring band out of silver (stamp, hammer finish, roller print, etc.)
evening #3: Working with wax create pieces w/the lost wax technique- to be cast in Sterling silver or bronze.
evening #4: Finishing wax projects, invest models for casting in Glass and Metal (separately) Waxes for metal casting are weighed and calculated (sterling runs $2.50/grm unless lab fee has been purchased).
evening #5: Cast moulds in sterling silver or bronze! Remove glass pieces from moulds.
evening #6: Enameling copper projects, forming, how to make your own basic findings.
evening #7: Bezel settings cabochon stones or fossils or crystals, or an enamelled or Fused glass piece.
evening #8: Finish up projects
No experience necessary!
Copper, wax, glass, and some sterling silver are supplied*. A list of local suppliers is included. Questions concerning this course? Please see our FAQ’s
Approx 4×5” piece of copper sheet, 2’ copper wire, sterling silver for 1 ring band, fine silver bezel wire to set 1 cabochon cut stone. Glass is included for casting/flame-working (whatever method is covered), silver solder to complete class projects, wax, bronze/brass for lost wax casting (20grams) & powdered vitreous enamel, 1 doz saw blades, 1 1mm drill bit, 1 half face particulate respirator, nitrile gloves, refractory materials for casting moulds. Students are encouraged to supply their own cabochon cut stones, crystals, rocks, etc.
Additional materials not included: cabochon cut stone(s), sterling silver grain for lost wax castings, sterling silver sheet/plate for setting stones on/constructing other pieces. Sterling silver casting grain may be purchased at $2.50gram.
**Please read our FAQs & policies