Metal & Glass & Vitrigraph!

Learn how to form, fabricate, solder, set-stones in our 4 wk Metal + Glass course, etch, cast and more!

Metal + Glass 4-week course Starts up August 13th – 8 evenings. Monday & Wednesday 6:30-9:30pm $285/pp Pay in full or put down a deposit.

evening #1: First evening: working with copper: safety, drilling, sawing. Adding textures.evening #2: Making a ring band out of silver (stamp, hammer finish, roller print, etc.)

evening #3: Working with wax create pieces w/the lost wax technique- to be cast in Sterling silver* or bronze.

evening #4: Finishing wax projects, invest models for casting in Glass and Metal (separately) Waxes for metal casting are weighed and calculated (*sterling runs $2.50/grm. Lab fee includes 15grams of sterling silver casting grain). Lo-tech casting with Cuttlefish bone.

evening #5: Cast moulds in sterling silver or bronze! Remove glass pieces from moulds.

evening #6: Enameling copper projects, forming, how to make your own basic findings.

evening #7: Bezel settings cabochon stones or fossils or crystals, or an enamelled or Fused glass piece.

evening #8: Finish up projects

No experience necessary!

 

Copper, wax, glass, and some sterling silver are supplied*.  A list of local suppliers is included.   Questions concerning this course? Please see our FAQ’s

What’s included:
Approx 4×5” piece of copper sheet, 2’ copper wire, sterling silver for 1 ring band, fine silver bezel wire to set 1 cabochon cut stone. Glass is included for casting/flame-working (whatever method is covered), silver solder to complete class projects, wax, bronze/brass for lost wax casting (20grams) & powdered vitreous enamel, 1 doz saw blades, 1 1mm drill bit, 1 half face particulate respirator, nitrile gloves, refractory materials for casting moulds.  Students are encouraged to supply their own cabochon cut stones, crystals, rocks, etc.

Additional materials not included: cabochon cut stone(s), sterling silver grain for lost wax castings, sterling silver sheet/plate for setting stones on/constructing other pieces.  Sterling silver casting grain may be purchased at $2.50gram.

The lab fees offer tools and materials for students to continue projects at home and start setting-up their own studio. Lab fee 2 (kit) Option 2 Please see below class descriptions for what is included in this option.
Lab fee 1 $125.00 (optional) what it includes:
adjustable jeweller’s bench pin, jeweller’s saw frame, 1 gross (144) jeweller’s saw blade assortment, 15 grams of sterling silver casting grain, 1 3×3” sterling silver plate
Lab fee 1

 

 

 

Vitrigraph workshop: Pulling cane and murrini making tiles and bowls. Saturday & Sunday August 18/19/25/26  $350 pp includes all materials, instruction, firing/slumping times. 10am – 5pm (break for lunch at 1pm). Deposit of half accepted via eTransfer to nanotopia@me.com

Working with Bullseye crucibles and glass students learn how to cut glass and set it up for the Vitrigraph kiln. Working in teams students assist each other in pulling their cane/murrini and shapes. Students cut-up, slice and design their tiles/plates. Work is then fused over the week. Students can then slump their tiles into bowl forms. Students will learn how to make their own slumping forms using various refractory materials. 

Metal + Glass individual workshops

The studio is offering individual workshops in metal forming and fabrication/soldering, ring band forging, kiln forming or flame working, bezel setting stones, carving wax, lo-tech casting, etching metal, cold connections and more!

Each workshop runs 3 hours and includes materials necessary to cover the projects. No experience necessary! Afternoon hours 1-4pm or Evening hours 6:30-9:30pm

Please see workshop schedule below:

Monday, May 15th or 29th- Form, fabricate (saw, drill): working with copper: safety, drilling, sawing. Adding textures. Make a pendant, cuff bracelet or a couple of rings. Heat colouring the copper, sweat soldering is covered. $88pp includes saw blades, drill bits, 2″ x 4.5″ piece of copper, silver solder. 

 



Ring band workshops

Wednesday May 17 or May 31st- Ring band workshop: Making a band ring out of silver (stamp, hammer finish, roller print, etc.) Learn how to properly size, measure your finger, anneal sterling silver, joint solder, form and finish a beautiful sterling silver ring! $88pp includes all materials to complete 1 ring band.

 

 



Monday, May 22nd or June 14th- Kiln & Torch fired Vitreous enamel: Enameling copper projects, forming, how to make your own basic findings. Saw, add texture, form a pendant, add powdered glass enamel. $88pp includes enamel and 2″x2″ piece of copper, saw blades, drill bits. There is no soldering in this workshop.  

 

 



Wednesday May 24th or Monday June 19th-  Bezel set a cabochon stone or flat bottomed crystal: Learn how to bezel set stones working with fine and sterling silver. Pendants are made in this workshop. $88pp includes all materials for 1 pendant.

 

 



Wednesday May 24th or Monday June 29th- Bezel set a cabochon stone or prong-set a crystal/fossil: Learn how to bezel set stones working with fine and sterling silver. Rings are made in this workshop $125pp includes all materials for 1 ring with a bezel OR prong set crystal/fossil. Materials available for use include; bronze, sterling silver. A ring incorporating both metals is allowed! 

 



Register for the entire 4 week series starting May 29th: $275pp Again: zero experience necessary! 

 

METAL + GLASS 4wk: Next course starts up Monday May 29th, 2017 and runs Monday & Wednesday evenings • Learn basic Goldsmithing – 12pm to 3pm or 6:30-9:30pm 

evening #1: First evening: working with copper: safety, drilling, sawing. Adding textures.

evening #2: Making a band ring out of silver (stamp, hammer finish, roller print, etc.)

evening #3: Working with wax create pieces w/the lost wax technique- to be cast in Sterling silver or bronze/brass.

evening #4: Finishing wax projects, Cuttlefish casting (lo-tech) in house.

evening #5: Kilnworked glass. Fuse several glass pieces (buckle, pendant, cabochon for setting later!).

evening #6: Enameling copper projects, forming, how to make your own basic findings.

evening #7: Bezel settings cabochon stones or fossils or crystals, or an enamelled or Fused glass piece.

evening #8: Finish up projects

No experience necessary!

Copper, wax, glass, and some sterling silver are supplied*.  A list of local suppliers is included.   Questions concerning this course? Please see our FAQ’s

What is included: (items with asterisk included with Lab Fee)

Approx 3″ x 3″ piece of 16 to 18 gauge copper & *16 ga Sterling silver sheet & wire/15 gr casting grain

Sterling silver for 1 ring band, approx 60mm in length and 1.5mm thick (6mm wide)

Wax

Solder

1 dozen 3/0 saw blades, *1 gross selection of Jeweller’s saw blades

Glass powders/Frit & sheet for Fusing *Approximately 1kg of Lead crystal towards a lost wax casting.

Bezel wire for 1 setting

Use of tools & equipment *Bench pin and saw frame to take home

Students are encouraged to supply their own cabochon cut stones, crystals, rocks, etc. However there is a small selection of stones for students to choose from.