Sculpt molten glass

glass cabsGlass cabochons, bezel settings & fold forming, heat rivet connections & simple hollow forms. 4 evenings starting Tuesday June 7th-28th (runs Tuesday evenings 6:30-10pm), $280pp Deposit of half required to hold seat. Seating is limited-register soon!
Students form molten glass into cabochon forms for bezel and tab settings.
1st evening: Working with hard glass students learn how to form, add inclusions, powders, and foils to create cabochon forms. Annealing schedules are discussed, learning heat control and manipulating molten glass.
2nd evening: Students remove their glass ‘cabs’ from the annealing kiln, inspect them, cold-work if necessary and start to design and solder their bezel settings. Fold forming, heat rivets (or pinning) is demonstrated, and hollow-form construction. Students start to build their pieces.
3rd evening: Thick wire tab setting is demonstrated. Students continue building their work.
4th evening: Students finish up their projects.

What’s included: Copper, brass, solder, all glass and copper metal foil.
Students are encouraged to bring in their own fine silver foil, bezel wire and sterling silver sheet, but this is not mandatory.

register
Register with half down

 

 

 


btn_buynow_LG
Full Payment

 

 

Screenshot 2015-11-05 11.32.55il_fullxfull.513026624_fmwo

Metal 2: Casting, Etching, Electro-forming in Toronto

Metal 2 is almost full!
1 space left as of March 7th!
cuttlecastmetal 2
Form • Fabricate • Electroform • Etching • Fuse

6:30-10pm, 1 evening per week, Thursday evenings March 20th, 12 weeks- 3 student minimum, 5 max. $180pp + $250 lab & materials fee**

Demonstrations in fold forming, etching (copper & silver), and hollow forms (making silhouette dies), electroplating, Lost Wax casting and fusing glass small scale items & Sterling settings. This course gives students hands on experience manipulating metal, electroforming, and embellishing metal, while sharpening soldering and fabrication skills working on personal projects. Students will work together and independently on their projects.
Starting out with an introduction on techniques covered, expectations, design considerations, and ends with students finishing off fold formed samples/pieces, an etched hollow form, electroforming organic/inorganic objects, setting up & casting for lost wax, fusing a small glass colour bar*, and unusual settings with Sterling silver.

Fast paced, students need to show up ready for action! Materials fee includes: a 3″x 3″ piece of 16 gauge Sterling silver plate, 16 gauge 12″x 6″ copper, 2 ounces of Sterling silver casting grain, 1 gross of 3/0, 1/0, & 1 doz spiral saw blades. 3″x4″ plexiglass, Silver solder, flux, wax and expendables necessary for (copper) electroforming, casting and glass for fusing. Use of tools and equipment. Beginners welcome! Register online!

nanopod: Hybrid Studio’s -metal + glass- course has started to fill up! Next 8 week course starts up Monday, April 28th. Further info, and how to register can be found here!

Metal 2, electroforming/plating, hollowform, casting, fusing, etching workshops in Toronto

metal 2
Form • Fabricate • Electroform • Etching • Fuse

6:30-10pm, 1 evening per week, Thursday evenings  March 13th, 12 weeks- 3 student minimum, 5 max. $180pp + $250 lab & materials fee**    

Demonstrations in fold forming, etching (copper & silver), and hollow forms (making silhouette dies), electroplating, Lost Wax casting and fusing glass small scale items & Sterling settings. This course gives students hands on experience manipulating metal, electroforming, and embellishing metal, while sharpening soldering and fabrication skills working on personal projects. Students will work together and independently on their projects.
Starting out with an introduction on techniques covered, expectations, design considerations, and ends with students finishing off fold formed samples/pieces, an etched hollow form, electroforming organic/inorganic objects, setting up & casting for lost wax, fusing a small glass colour bar*, and unusual settings with Sterling silver.

Fast paced, students need to show up ready for action! Materials fee includes: a 3″x 3″ piece of 16 gauge Sterling silver plate, 16 gauge 12″x 6″ copper, 2 ounces of Sterling silver casting grain, 1 gross of 3/0, 1/0, & 1 doz spiral saw blades. 3″x4″ plexiglass, Silver solder, flux, wax and expendables necessary for (copper) electroforming, casting and glass for fusing.              Use of tools and equipment.  Beginners welcome!

* cold working glass (sawing, fusing, polishing) for use in the Sterling setting portion or students can choose to cast glass. If you’d like to try both options add $45 onto lab fee
** students may opt to work on a project of their choice or just the sections available below.
Electroforming runs for 3 evenings at  $130pp
Lost wax casting runs 4 evenings at $180pp plus $130 lab fee (includes wax for ring or pendant and 2 ounces of Sterling casting grain)
If you have any further questions concerning this course, drop me an email!

register **The Lab & Materials fee is necessary if registering for the full course.

—————————————>

metal 2 – Electroforming + Plating objects Interested in Electroforming & Plating organic items? Register for the electroforming part of this course (4 spaces available!) Thursday evenings, April 3rd to 24th 6:30-9:30pm $130pp  Students will electroform small items such as twigs, leaves, acorns, pods (iris, poppy) glass beads, crystals, gem stones, fossils, lace, wax models. Students will learn how to set-up their own electroforming/plating space at home or in their studio. How to prepare items to be electroformed: sealing items, adding jump rings, etc. Finishing items: plating with brass, gold*, black chrome, etc., adding patinas, enamelling pieces (however enamelling is not included in this workshop. Students need to bring latex, or Nitrile gloves, a glue gun & hot glue plus items** they would like to electroform/plate. *gold is not included but will be discussed. **items made in this class will be pendants, very simple rings or free standing objects.

register

 

 

 

Lost wax cast rings in bronze and Sterling silver. Beginning student work!

Lost wax cast rings in bronze and Sterling silver. Beginning student work!

 

Metal 2 – Lost Wax Casting Interested in casting your own wax models? Register for the lost wax casting portion of this course (4 spaces available!) Thursday evenings, May 1st thru May 22nd. Lost wax casting runs 4 evenings at $180pp plus$130 lab fee deposit (includes wax for ring or pendant and 2 ounces of Sterling casting grain)

 

register

 

 

 

 

 

Glass Casting, Fold Forming & Electro-forming Workshops!

Happy Sunday & Hello!

Check out nanopod’s new pricing structure! Some of our workshops and courses will now require a Lab and Materials fee upfront, as a non-refundable deposit.  Your ‘deposit’ goes towards materials, and expendables necessary for the workshop or course you registered for. Many items need to be purchased in advance due to shipping distances, and Holiday shipping cut-off dates, etc.

That said, this restructuring has also lowered some of our workshop fees!! 🙂 Check it:

20130303-165534 20130303-165702Ars Vitraria Experimentalis : Glass casting workshop
January, 10th start/intro 6:30-9:30pm then Saturday 11, 18 & 25th and Sunday 12, 19 & 26th 10am to 5pm
5 Student max., 3 student min. $180pp + $200 lab & materials fee $380 total for this workshop!

axel2 sylv_butterfly2metal 2
Form • Fabricate • Cast
forming, fabricating, casting, electroforming
6:30-10pm, 1 evening per week, Wednesday evenings starting Jan 16th to April 3rd, 12 weeks (Open Studio time available during the course), 5 Student max., 3 student min. $180pp + $200 lab & materials fee.   $380 total for this course!

Another really great update, and popular this time of year – Gift Certificates!  Purchase a gift that keeps on giving for a friend, or loved one! With a workshop or course you are not only covering the workshop/course fee you are also giving a life-skill-learning experience! Your gift may aide towards a new career in the arts, or your friend will finally be able to create a design they’ve been dreaming of for years! Most of nanopod’s workshops and courses include ALL materials & expendables (unless noted) so, your gift certificate covers everything. gift_cert24