Update to Flame-Working demo: Wednesday evening. Please RSVP if you plan to attend.

Due to unexpected events over the long weekend, I have had to move the Flame-working demos to Wednesday evening. Please RSVP IF you plan to attend: nanotopia@me.com

Want to check out what Flame-Working is all about? Wednesday evening, May 23rd  7pm demonstrations will be held in mandrel-wound glass bead making. Afterward, visitors are invited to try making a bead (or 2, depending on popularity). Beads made this evening can be picked up the following Open Studio (which takes place Thursday, May 24th).

flame working
Flame-working

Evening demonstrations introduce the basics of mandrel-wound glass bead making by the process of flameworking (lampworking) shaping glass at a bench-mounted, surface-mix oxygen/propane torch. Safety is discussed, various tools used for shaping, sculpting, and how to clean up your beads after they’ve annealed.

Annealing temperatures are explained and covered.

Special Summer Open Studio

24/7 Open Studio time Members have access to the studio facilities 24/7 June thru August* membership is $175/mo and includes access to studio tools, and equipment (contact us in advance if you require any equipment orientation).

Subscribe to membership online or via eTransfer (eTransfer to nanotopia@me.com) For this Summer’s special deal 1st & last is required up front. 

Email the studio for further details, or come by Thursday, May 17 or 24 – meet & greet, sign an agreement and receive a key fob.


Materials and consumables are not included in Open Studio time – you need to supply your own saw blades, solder, drill bits, wax, metal, enamel powders, stones, etc. Assistance/guidance is not included, however you need to know what you are doing and how to properly/safely operate equipment, tools, and torches. If you are unfamiliar with some of the industrial/dangerous (chop off fingers, burn off your scalp equipment we suggest taking a beginning workshop or 4wk course). Orientations on how to operate our kilns needs to be booked in advance of kiln use please.

Local Suppliers: Gesswein and sells metal working supplies. Imperial Products (now called Umicore)supplies sterling silver, and gold in sheet form, wire, solder, tubing, etc. For casting your wax models there are a number of casting companies in Toronto: HL located at 59 Adelaide East, just west of Church street. Ready Mounts Casting– on Victoria close to Dundas Square, Procast– located in the 21 Dundas building, 7th floor.

nanopod is a non-smoking environment. Please refrain from wearing heavy perfumes, hair spray, soaps and smoking under the awning/in front of the studio.

BYOHP= Bring your own head phones! At nanopod- music is life. That said, if you don’t like electronic, ambient, classical, and the generally bizarre, please bring your own tunes/headphones 🙂

 

Late Summer & early Fall Metal + Glass dates are up!

Learn how to form, fabricate, solder, set-stones in our
4 wk Metal + Glass course, etch, cast and more!

Metal + Glass 4-week course Starts up August 13th or September 10th • 8 evenings. Monday & Wednesday 6:30-9:30pm $285/pp (*after registering please email over your start date)

evening #1: First evening: working with copper: safety, drilling, sawing. Adding textures.evening #2: Making a ring band out of silver (stamp, hammer finish, roller print, etc.)

evening #3: Working with wax create pieces w/the lost wax technique- to be cast in Sterling silver or bronze.

evening #4: Finishing wax projects, invest models for casting in Glass and Metal (separately) Waxes for metal casting are weighed and calculated (sterling runs $2.50/grm unless lab fee has been purchased).

evening #5: Cast moulds in sterling silver or bronze! Remove glass pieces from moulds.

evening #6: Enameling copper projects, forming, how to make your own basic findings.

evening #7: Bezel settings cabochon stones or fossils or crystals, or an enamelled or Fused glass piece.

evening #8: Finish up projects

No experience necessary!

Copper, wax, glass, and some sterling silver are supplied*.  A list of local suppliers is included.   Questions concerning this course? Please see our FAQ’s

What’s included:
Approx 4×5” piece of copper sheet, 2’ copper wire, sterling silver for 1 ring band, fine silver bezel wire to set 1 cabochon cut stone. Glass is included for casting/flame-working (whatever method is covered), silver solder to complete class projects, wax, bronze/brass for lost wax casting (20grams) & powdered vitreous enamel, 1 doz saw blades, 1 1mm drill bit, 1 half face particulate respirator, nitrile gloves, refractory materials for casting moulds.  Students are encouraged to supply their own cabochon cut stones, crystals, rocks, etc.

Additional materials not included: cabochon cut stone(s), sterling silver grain for lost wax castings, sterling silver sheet/plate for setting stones on/constructing other pieces.  Sterling silver casting grain may be purchased at $2.50gram.

The lab fees offer tools and materials for students to continue projects at home and start setting-up their own studio. Lab fee 2 (kit) Option 2 Please see below class descriptions for what is included in this option.
Lab fee 1 $125.00 (optional) what it includes:
adjustable jeweller’s bench pin, jeweller’s saw frame, 1 gross (144) jeweller’s saw blade assortment, 15 grams of sterling silver casting grain, 1 3×3” sterling silver plate
Lab fee 1

 

 



Metal + Glass Lab Fee 2: $357.00  

Lab fee 2

Set contains:
  • Jeweller’s Saw
  • Third Hand
  • Half Round Medium Cut File
  • Burnisher
  • 1 dozen Cut 0 Saw Blades
  • 1 gross (144) Saw blade assortment
  • AA Fine Tweezers
  • Shears
  • 1 set half-round Sanding Sticks
  • Ring Mandrel
  • Butane Torch
  • Dividers 4
  • Ring Clamp
  • Polishing Cloth
  • Needle File Handle
  • Locking Tweezers
  • Pin Vise
  • Soldering Board
  • Ball Pein Hammer
  • Round Nose Pliers
  • Scribe
  • Wood Dapping Block & Punches
  • Sidecutters 5
  • Silver Solder
  • 3×3” sterling silver plate
  • 15 grams of sterling silver casting grain
  • 12″x12″ sheet of 24 Gauge Copper
  • 6pc File Set
  • Chain Nose Pliers
  • Bench Knife
All items come with a plastic tool box.

Sonatona Gemstones visiting Nanopod Studio Monday May 7

Super exciting news! Pop on over to the studio tomorrow evening Monday, May 7th  between 7pm – 8pm Sonatona gemstones will be in da Haus! Sonatona is bringing along a wide selection of cabochon cut stones for you to drool over.

Everyone is welcome!  Students and non-nano students.  Cash or credit accepted.